Features Flexible Parallel I/O (Simple Cable Interface)
The cPCI-DIO24 is a simple 25-bit discrete I/O interface board. The host side connection is PCI based and the external I/O interface is variable (see below). The external interface includes 24 signals that can be arbitrarily programmed as either input or output...
Features Flash Memory to 64 Mbytes and/or 512 Kbytes of Battery-Backed SRAM
The CPCI-FLASH2 board has up to 64 Mbytes of on-board FLASH memory. The board also provides 512 Kbytes of battery-backed static RAM (non-volatile memory with a 10-year battery life). Typical uses include code storage, look-up tables, calibration data and data...
Features High-speed Parallel I/O (Flexible Cable Interface)
The CPCI-HPDI32A board is a fast and flexible bi-directional 32-bit digital I/ O board that transmits and receives data up to 80 Mbytes (differential I/ O) or up to 200 Mbytes (Pseudo ECL I/ O) per second. The board is use-ful as a general-purpose DMA interface...
Features High-Speed Async Serial I/O (to 5Mbits/ sec) with Deep FIFOs
The CPCI-HPDI32A-ASYNC is a full-duplex RS-422/ 485 serial I/O board. Each channel can operate up to 5M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces...
Features PMC Digital I/O with Change-of-State
The CPCI-HPDI32A-COS board is a 32-Bit parallel digital input board that samples input data (via the cable interface) at selectable rates. The board can detect any Change-of-State and store the changed data word data in the on-board FIFO. The board is programmable...
Features High-Speed Di-Phase Serial I/ O (to 10Mbits/ sec) with Deep FIFOs
The CPCI-HPDI32A-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces...
Features High-Speed Telemetry Serial I/O (to 20Mbits/ sec) with Deep FIFOs
The CPCI-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial...
Features Digital Video Input
The CPCI-HPDI32A-VIDEO series of boards has been adpated to work with CCD and Video Cameras such as made by Dalsa and Kodak. Modes include receiving digital video, as well as emulation of cameras. See the cPCI-HPDI32A and the cPCI-HPDI32ALT for details. ...
Features TTL or LVDS 32-bit I/O
The CPCI-HPDI32ALT board board is a flexible bi-directional 32-bit digital I/O board that transmits and receives data from 20 Mbytes (TTL I/O) to 200 Mbytes (LVDS) per second. The board is useful as a general-purpose DMA interface to a variety of external peripherals....
Features 4 Channel Serial Communications Card
4 independent full-duplex Asynchronous 16C950 High Performance UART Channels.
UARTs Fully software compatible with Industry Standard 16C55x type UARTs.
128 byte deep internal FIFO per channel per direction .
32Kbyte External FIFO per Channel Per...
Features 24-Channel Mutually-Isolated Analog Input/Output PCI Board with Isolated A/D and D/A conversion, and Input Sampling Rates to 200 KSPS per Channel
Model Series:MI-16AIO24WR
· 16 Mutually Isolated Analog Input Channels (Optional 8 channels available)
· 8 Mutually Isolated High-Level or Low-Level Analog Input Channels
· 16-Bit ADC and Active Lowpass Filter per Channel
· Sampling Rates to 200...
Features 4-Channel Mutually-Isolated Analog Output Board With Isolated D/A conversion, and Clocking Rates to 400 KSPS per Channel
Model Series: MI-16AO4
· 4 Mutually Isolated Analog Output Channels
· 16-Bit DAC per Channel
· Isolation-Side D/A Conversion *
· Exceptional 0.01 Percent Accuracy Across The Isolation Barrier
· Clocking Rates to 400 KSPS per Channel
· Supports...
Features 4-Channel Mutually-Isolated Wide-Range Analog Input Board with Isolated Conditioning and A/D conversion,and Sampling Rates to 200 KSPS per Channel
Model Series: MI-16AI4WR
· 4 Mutually Isolated High-Level or Low-Level Analog Input Channels
· 16-Bit, 200KSPS ADC and Active Lowpass Filter per Channel
· Isolation-Side Signal Conditioning and A/D Conversion (Eliminates the traditional errors caused...
Features 4-channel Serial I/O with Programmable Cable
The CPCI-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10...
Features Optically-Isolated I/O with Change-of-State Interrupts
The CPCI-OPTO32A board has 32 optically-coupled digital I/O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PMC host processor board. Change-of-State Interrupts allow for an interrupt to the PMC host...
Features 16-Channel Low-Level Analog Input Expansion Module
Model Series : SC16MX
· 16 Low-Level Analog Input Channels
· Occupies One Input of Analog Input Board (3A or 3B)
· Optional Scanning Current Excitation; Adjustable 0-2.00ma.
· Supports Thermocouple Cold Junction Compensation Input
· Scan Rates...[
Features High-performance Serial I/O (to 10Mbits/ sec) with Deep FIFOs
The CPCI-SIO4 is a four channel full-duplex RS-422/485 serial board. Each channel can operate up to 10 Mbits/s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface...[
Features High-performance Multi-Protocol Serial I/O with Software Configurable Cable Tranceivers (RS422, RS232 and others)
The PMC-SI04BX board is a four channel serial interface card which provides high speed, full-duplex, multi-protocol serial capability for PMC applications. The SIO4BX combines two multi-protocol Dual Universal Serial Controllers (USC®), 8 external FIFOs, and...
Features RS-232 Version of the cPCI-SIO4 with FIFOs
The CPCI-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the CPCI-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel....
Features Eight Channel High-performance Serial I/O (to 10Mbits/sec) with Deep FIFOs (Will be available on PCI, cPCI and PC104)
· 8 channel full-duplex RS-422/485 (RS232 can be provided) serial board
· Software compatible with the PMC-SIO4
· Each channel can operate up to 10 Mbit/ s
· Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data...
Features High-Speed Digital I/O; 64-bit PMC on CPCIX; LVDS or TTL Transceivers
The CPCIX-HPDI32ALT board provides a 64-bit 66MHz PCI interface capable of 400Mbytes/sec. The board is useful as a general-purpose DMA interface to a variety of external peripherals. The DMA engine is capable of transferring data to/ from Host memory using D64...
Features High-Speed Digital I/O; 64-bit PMC on CPCIX; Huge FIFO Buffer; LVDS or TTL Transceivers
The CPCIX-HPDI32B board provides the same capabilities as PMC64-HPDI32A versions with Huge FIFO Buffers. Different buffer sizes are available from 32Mbytes to 256Mbytes providing 32-bit buffering of 8M to 64M samples, respectively. The buffers can be configured...